1. • Knitted Polyester

   • The industry standard knitted polyester flag material

   • 1. • Knitted Polyester***28
     2. Width *

        This field is required

     3. Height *

        This field is required

     4. ScaleMetres (m)Centimetres (cm)Millimetres (mm)Feet (ft)Inches (in)Paper Sizes (mm)
     5. Paper Sizes

        • A0
        • A1
        • A2
        • A3
        • A4
     6. Orientation

        • Portrait
        • Landscape
     7. Quantity12345678910More
     8. Quantity
     9. FinishStitched Hems & EyeletsStitched Hems OnlyStitched Hems with VelcroPole Pocket(s)Rope & Toggle

     Fields marked with a * are required

     • Calculate Price

2. Material Overview

   • Industry standard 117gsm knitted polyester
   • Lightweight and durable
   • High-quality full-colour print
   • Printed with dye-sublimation process
   • 80-90% show-through on the reverse
   • Finished with industrial sewing machines
   • Approx. maximum finished flag width: 3000mm (depending on chosen finish)
   • Roll width: 3200mm

   Our flag material is chosen for its durability and image vibrancy.

   Flags are printed via a process of dye-sublimation which uses special inks and undergoes a post-print heating process to 'fix' the ink into the fabric. This makes it both scuff-resistant and washable.

   Each flag is printed and finished to your requirements.

   Uses for Knitted Polyester

   • Suitable for both indoor and outdoor use
   • Flags and flag products

   Unsure about artwork set up?

   For help on setting up your artwork please don't hesitate to contact us, or you may wish to refer to our Artwork Requirements guide. We will always do a free pre-press check before printing and notify you of any potential problems.

   Or if you would like us to take care of the design please get in touch. Take a look at our Graphic Design page for more information.

   Notice

   Our thread colours are black or white. We will choose the most appropriate colour to complement your graphic, unless otherwise specified.

   Currently we can only print up to 3 metres on the shortest edge, to our standard pricing. Flags above this size will need a bespoke quotation.

Finishes available for Knitted Polyester

• 1. 

  2. Stitched Hems & Eyelets

     Graphics will be given a stitched hem, then eyeletted at equal distributions along the hem. Eyelets are clear plastic.

     The standard distribution of eyelets is one per metre. If you require a different distribution or specific placement of eyelets, that is no problem at all - simply let us know what you need when you place your order.

     There is no charge for this finish.

• 1. 

  2. Stitched Hems Only

     Graphics will be given a stitched hem.

     There is no charge for this finish.

• 1. 

  2. Stitched Hems with Velcro

     Graphics will be stitched to a strip of either hook or loop edging. Please specify which is required when ordering.

     A variety of widths are available - please contact us to discuss your requirements.

     Black or white strips are available. Our sewists will choose the most appropraite colour to complement your graphic, unless specifically requested.

     There is an additional charge for this finish.

• 1. 

  2. Pole Pocket(s)

     A pocket is added to the edges you require to allow a pole to pass through and support/tension the banner.

     The diameter of the pocket can be specified by you, however, if you let us know the diameter of the object to go into the pole pocket we can calculate the size of the pocket for you.

• 1. 

  2. Rope & Toggle

     A common finish for flags. We sew in a rope with a toggle so it can be easily used on flag poles.